Home ServicesGarage Doors repairs Why won’t my Garage door close?

Why won’t my Garage door close?

by admin

Garage doors provide you the ease of entering your home with just the push of a button. They keep your belongings and your cars safe, from theft and storms. And so, naturally, they too require care in the form of frequent inspections.

Despite all the care, your garage might still act a bit finicky sometimes and refuse to close. While you might be able to fix the problem at home sometimes, you will require the help of garage door repairs in Moruya, in most cases.

Want to know why your garage door won’t budge despite trying numerous times? Here are 8 possible reasons why your garage door won’t close, and how to resolve the problem!

  • Something is blocking the way of the door

As simple as this one might seem, this reason can be commonly overlooked. Even though there might not be a large object obstructing the way, there could be a tiny toy lying around, that you’ve probably missed, or even dirt and grime. Clear the way, and try shutting the door down again.

  • The photo eye sensors have accumulated dirt

Photo-eye sensors are a safety feature and are placed 6 inches above the ground on either side of the garage door. Their operating method involves sending and receiving an invisible beam that connects them. If anything interrupts the beam, the door fails to close. This feature is specifically designed to safeguard kids and pets, lest they move under the heavy garage door that’s closing, and suffer major injuries or even death.

These photo eye sensors are really sensitive, and can even get obstructed by dirt or debris. This causes the beam to disconnect and the door fails to close.

To remove the dirt, take a piece of a soft cloth and gently clean the lens of the sensors. Since the lens is extremely delicate, make sure not to scratch it! If even removing the grime doesn’t solve the problem, try out fix number 3!

  • The sensors are misaligned 

The photo eye sensors can get skewed, resulting in beam disconnection. There is a feature in the sensors where if the beam gets disconnected, the light in the sensors starts to blink, gets dim, or dies down completely, depending upon the model and company of your garage door.

Try to move the sensors gently, so they are aligned once again. If the sensor refuses to move smoothly, do not apply force. You might break it. In that case, get professional help and find some quality garage door repairs in Moruya.

  • The Batteries in the remote are dead!

This one is simple. There’s a transmitter in the garage door opener that requires signals from your remote control to open or shut. If your batteries have died out, the open and shut mechanism would no longer work!

See if your batteries have gotten old and require a change. While you might have changed the batteries recently, extreme weather conditions can affect the battery’s longevity.

  • The door tracks are damaged

The garage door opens and closes sliding across its tracks. These tracks need to be very precise and parallel, and there should be no gaps, for the door to move smoothly. If these tracks are out of alignment or broken in between, the door won’t move. The reason for damaged or bent tracks is the heavy garage door itself. This situation can get dangerous, which is why an early repair should be sought.

Unfortunately, there is no way you can fix it at home, and you would require a professional’s help for garage door repairs in Moruya.

  • The cables that lift the garage door are damaged

The automatic garage door relies on some kind of cable that does the pulling action to open the door. This cable can get worn out over the years, causing a hindrance in the door function. You will have to seek a professional’s help to change the cable.

  • The springs are damaged

Your garage door has either of the two kinds of springs, Extension or Torsion. Torsion springs are more widely used nowadays. These springs are located to the top of the garage door and their winding and unwinding motion, in a controlled manner, causes the door to open or shut.

These springs can wear out over the years and cease to function. In this case, they will need a replacement.

  • The limit switch value

The garage door motors have limiting values that determine how far the door needs to move before closing completely. If these values are off-limits, the garage door will immediately start reopening as soon as it moves down, to prevent an accident.

You need to re-adjust the limits for the door to shut completely. Take the help of the user manual, and give it a few tries, hopefully, you’ll be able to solve the problem on your own.

Takeaway

The garage doors are wearing and tearing daily. They must be frequently inspected by professionals. Most of the garage door problems have a quick fix but, if you wait too long to take any action it can get dangerous and cost you a lot of work and money.

Garage doors not only provide safety, but they also add aesthetical value to your house. So, it is necessary to keep the door’s internal and external condition in check, so that the door keeps working in its optimal condition, and continues to provide value and convenience to you.

If there ever arises a major mechanical malfunction, do not try to fix the problem at home, it can be hazardous to you and the people around you. Always seek the help of professional garage door repairs in Moruya.


Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.

You may also like

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy