Home Plumbers Pro Plumber Tips: How to Fix Leaking Taps

Pro Plumber Tips: How to Fix Leaking Taps

by admin

Leaking taps are one of the most common plumbing problems in many homes. Not only can it be frustrating, but it is also wasteful. If not fixed on time, it could waste water, cause damage to your home and also increase your water bill if left unaddressed. Fortunately, fixing a leaking tap is usually a simple task that you can do yourself. In this post, we will be going through seven ways you can fix a leaking tap without needing to call in the Plumbers in St Marys. 

Tips for Fixing Leaking Taps 

  1. Tighten the Tap 

This is the first and most basic thing you can try. Sometimes, the reason why your tap may be leaking might be because it has become loose over time. To tighten the tap, turn it clockwise using a tool or pliers. Overtightening the tap might cause more harm, necessitating the services of experienced Plumbers in St Marys. 

  1. Replace the Washer 

If tightening the tap does not solve the problem, the washer within the tap may be worn or broken. Turn off the water supply to the tap and remove the tap handle to replace the washer. Then, replace the nut that holds the washer in place with a new one. Make sure that the new washer is the same size and type as the old one. 

  1. Replace the O-Ring 

Another reason for a leaky tap is a worn-out or broken O-ring. The O-ring is a tiny rubber ring that lies within the faucet and aids in the formation of a watertight seal. Turn off the water supply to the tap and remove the tap handle to replace the O-ring. Then, replace the nut that keeps the O-ring in place with a new one. 

  1. Replace the Valve Seat 

If the washer and O-ring are in good shape, the issue might be with the valve seat. The valve seat is the section of the tap against which the washer rests when the tap is closed.  

The valve seat might get worn or rusted over time, causing the tap to leak. A valve seat wrench is required to replace the valve seat. Remove the tap handle and bonnet and turn off the water supply. Then, using the valve seat wrench, remove the valve seat and reinstall it. 

  1. Clean the Tap 

If the tap is leaking from the spout, it may be due to a build-up of debris inside the tap. To clean the tap, turn off the water supply and remove the tap handle and bonnet. Then, use a toothbrush or a small brush to clean the inside of the tap. Rinse the tap with water and reassemble it again. 

  1. Replace the Tap 

If none of the aforementioned alternatives work, it is possible that the tap has to be replaced. Taps can get worn and broken over time, making them difficult to replace. If you decide to replace the tap, make sure to consult with your Plumber in St Marys to select a high-quality tap that is appropriate for your needs. 

  1. Call a Plumber 

If you can’t fix the leaky tap yourself, it’s time to hire a plumber. A plumber can immediately evaluate the problem and recommend a way to repair the leak and avoid future damage. Plumbers in St Marys can provide dependable and skilled service if you reside in the neighbourhood. 


Leaking taps is a problem that should not be ignored. With these seven tips, you can easily fix the problem yourself or with the help of professional Plumbers in St Marys. Always turn off the water supply before attempting any repairs, and choose a high-quality tap if you need to replace it. By taking care of your taps, you can save water, prevent damage to your home, and enjoy a more efficient and functional plumbing system. 

Disclaimer: This is generic information and posts; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website. 

You may also like

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy