There is no denying that garage door problems are pretty common. But do you know how to deal with them? Have you ever tried to repair the garage door by yourself? If not, you can try it now.
Repairing the door is only tricky once there’s no big technical problem. This blog will share some easy garage door repairs Bermagui solutions for the most common garage door issues. So, let’s begin!
The Problem Might be in the Remote
The first thing you need to check is whether the remote is working or not. Because the remote’s battery often goes out of order. To check that, take a second working remote and exchange the battery with the first one. If it works now, you’ll have to get new batteries.
Besides, if the remote is unsynchronized, you’ll have to reprogram it. It’s not a tough job. Just look into the user’s manual or search on the internet. It’ll guide you about reprogramming, and that’s it. It’s that simple!
The problem can be with the Opener’s Switch.
Yes! Many times, it’s the switch that causes problems. The button on the switch might be broken or stuck. First, disconnect the switch with the motor by unplugging it. Then use the screwdriver and unscrew the nuts of the switchboard. Remove the faulty board and replace it with a new one.
Now plug in the motor again and check the open/close button. Now you’ll notice a smooth up-and-down motion of the garage door.
Garage door repairs Bermagui using grease.
Sometimes all parts of the garage door work pretty well; only the hinges and door track need some lubrication. But before lubricating, you must clean dirt from the hinges and track them with a brush or a piece of cloth. Generally, a brush is a better option as its bristles go deep and bring out all the dirt. You can also vacuum the area.
Once you clean, spray a lubricant like a grease or oil on the hinges and the track. Clean the excess lubricant with a cloth. Now, your door will move effortlessly.
Look for obstruction or misaligned sensors
Often, people encounter a problem where their closed garage doors reopen. Why does this happen? Well! There are two reasons for it. Either there’s some obstruction in the door, or the Infrared sensors need to be aligned.
Check the door for obstruction and remove it. If you didn’t find any, check the sensors. They are at the height of six inches from the ground on both sides of the door. When they are misaligned, the receiving sensor will flicker more.
You’ll have to loosen the wingnut of the receiving sensor. Adjust it till the flickering light changes to a stable green light. When done, tighten the nut again. Now close the garage door with a remote control.
Repair the seal
A broken or old seal located at the base of the door can also be a reason. If that’s the case, you have to repair the seal. Open the door, unscrew the old seal, and replace it with the new one. And it’s done. Close the door and check if it’s a tight fit. If not, you can adjust it.
Need Professional Help?
If you think you can’t fix the problem, don’t worry. Contact Southern Garage Door. We specialize in all types of garage door repairs Bermagui. Well-recognized for quality work and fast services throughout the week, our service will satisfy you. Call us and get your garage door issues sorted in no time.
The Final Verdict – Garage Door Repairs Bermagui
Garage door problems are common, and they are often not too technical. You can easily handle them on your own with the solutions mentioned above. If you cannot do it yourself, and the issue seems serious, seek professional assistance.
Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website.