Home Duct Fitting A Quick Guide to the Different Types of Duct Fitting

A Quick Guide to the Different Types of Duct Fitting

by admin

Need a duct fitting for your HVAC system? Duct fittings are a vital components of HVAC systems that facilitate efficient airflow and ventilation. The optimal performance of your HVAC system hinges on choosing the correct duct fitting.  

Yet, with the vast selection of duct fitting accessories in Canberra, it can be challenging to discern which type is most suitable for a given situation. This article aims to provide you with a brief guide to the various kinds of duct fittings commonly used in HVAC systems so you can make informed decisions when selecting duct fittings. 

 

7 Duct Fittings for your HVAC System Available in the Market 

  1. Elbows 

The elbows are the most popular of duct fittings, they look like their name the elbow and are used to change the direction of airflow in ductwork. Elbows can be used in a variety of angles, including 90 degrees, 60 degrees, 45 degrees, and 30 degrees. 90 degrees is the most popular since it is used to make right-angled turns in the ductwork.  

Elbows are press-formed valves that were stitch-welded together. You can get elbows made from PVC, aluminium, or galvanised steel. For your duct fitting accessories, you can get in touch with the nearby HVAC suppliers in Canberra. 

  1. Reducers 

Reducers are components that taper down one end of a duct to match the size of the other duct when connecting two ducts of different sizes. For instance, you would need a reducer to taper the 12-inch duct to 10 inches if you needed to connect a 12-inch duct to a 10-inch duct. You can purchase several sizes of reducers to fit different ductwork configurations from duct-fitting accessory suppliers in Canberra. 

  1. Tees 

These duct fittings are used to redirect from the main duct and join to a secondary duct. They have a letter T shape, and you can connect one end to the primary duct while the other two ends are connected to the secondary ducts. To fit various ductwork configurations, these duct fittings come in a variety of sizes. 

  1. Wyes 

The Wyes can be used to join two ducts at a 45-degree angle. They resemble the letter Y and are similar to “tees” duct fittings; however, the “wyes” are linked at a 45-degree angle rather than a 90-degree one. Duct-fitting accessories will be made available to you by the HVAC supplies in Canberra for the different configurations of ductwork you require for your building’s heating or cooling system. 

  1. Dampers 

In order to regulate the amount of air that travels through your ducts, dampers are used to control the flow of air in the ductwork. Because they regulate airflow and guide it to particular areas of your home, dampers are a useful tool for controlling the temperature in heating and cooling systems. An internal metal plate of the duct is turned or rotated to do this. 

  1. Plenums 

The plenum is a box connecting your HVAC system to your ductwork and is made of sheet metal. The plenum circulates throughout the entire ductwork to distribute the air to various parts of your building once your HVAC system provides the air, whether it is warm or cool.  

They usually connect to the air handling unit at the ductwork’s end. And while they take in air, they also release it outside the house. Plenums may be acquired with the HVAC suppliers of duct fitting accessories in Canberra and come in a variety of sizes and materials. 

  1. Register boots 

The air ducts are connected to the air registers or grilles using register boots. They are made to connect to the register or grille and fit over the ducting. The register boots, which were chosen for their strength and longevity, offer a superior air seal to enhance the heating or cooling system in your building. 

Conclusion 

The efficiency of the HVAC system in your building is greatly dependent on the duct fitting. You might or might not be aware that the various duct fittings listed above have different functions.  

You don’t have to install your duct fitting yourself; instead, contact the professional of duct fitting accessories and installation in Canberra for the job. They will make sure that your building has adequate airflow. 

 

Disclaimer: This is generic information and posts; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website. 

You may also like

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy