Home Paints 6 Things To Do Before Painting Metal Surfaces

6 Things To Do Before Painting Metal Surfaces

by admin

If you’re thinking about painting metal surfaces, there are some things you should know first. In this article, we’ll cover six things that will help ensure your success and that your painted metal surfaces last as long as possible. 

So, let’s begin! 

1) Prepare Rusted Metal 

If you’re doing work of steel painting Sydney, you want to ensure that it’s clean and free of rust. If there is any rust on your surface, you’ll want to remove it before you start painting. 

It can be done by sanding away the rust or using a special chemical remover like ZEP’s Rust Fighting Metal Primer. 

2) Clean The Metal 

Before painting metal surfaces, it’s essential to clean them. If you don’t, your paint might not stick and could start peeling or flaking off after a few months. 

To clean your metal surfaces, sand them with sandpaper, followed by steel wool. Then wipe the surface with a rag soaked in mineral spirits and water. 

3) Use Metal Paint 

Metal paint is designed to be applied on metal surfaces, so you don’t have to worry about it chipping off or flaking off over time. 

It’s also great for the environment because it doesn’t contain harmful chemicals or toxins, making it safer for you and your family to use in your home. 

4) Repair Small Holes And Dents 

Make sure you’ve repaired any small holes or dents in the surface of the metal before starting painting. If you don’t, the paint won’t stick to the metal very well and will chip off easily. 

You can use a hammer and dolly to fix minor dents or holes in your metal surface, but if there are large holes or cuts, you’ll need to use a filler like Bondo before painting over it. 

5) Prime The Surface 

If you’re doing steel painting Sydney, you should prime it first. Primer is a unique paint that helps your finish coat stick to the surface. It’s like the glue that holds everything together, so if you skip this step, your final coat will look streaky and uneven. 

6) Remove Loose and Peeling Paint 

Loose and peeling paint is a sign that the surface of your metal is damaged. Removing loose and peeling paint is essential before applying new paint.

To remove loose and peeling paint, first, use a wire brush to remove the loose pieces by hand. Then use a chemical stripper to remove any remaining traces of paint. 

If necessary, follow up with sanding to smooth out any rough spots left behind by the chemical stripper. 


Steel painting Sydney is fun and exciting but can also be intimidating. You’ve got to get the right tools, choose the right paint, and apply it correctly. 

It’s easy to get overwhelmed by all the details and want to throw in the towel. But don’t! We’re here to help you make it through with flying colours—and we know that once you’ve finished your project, everything will look better than ever.

Disclaimer: This is a generic Information & post; content about the services can be changed from time to time as per your requirements and contract. To get the latest and updated information, contact us today or visit our website. 

You may also like

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More

Privacy & Cookies Policy